- New
Heleno Vinyl
The HELENO Vinyl is a technical vinyl in a luminous wheat beige tone, warm and light, with a cheerful presence without becoming an intense yellow or a golden shade. It works well in Mediterranean and contemporary interiors, especially when you want a bright base with more character than a neutral cream. It pairs especially well with wood-effect vinyl with fine grain, solid colour vinyl wraps in vanilla or soft ochre tones, desaturated greens, light blues, burnt terracotta and terracotta shades.
- Two-layer construction: opaque base with professional adhesive, finished with a protective laminate.
- Certified eco-friendly inks with UV protection. It will not yellow or lose colour.
- Water and steam-resistant, fully waterproof, and withstands cleaning products.
- Outdoor durability up to 8 years. More than 15 years indoors.
- Fire reaction classification B-s1,d0 according to EN 13501-1: triple fire assessment (ignition, smoke production and flaming droplets).
Heleno Vinyl: luminous wheat beige for warm, contemporary interiors
The HELENO Vinyl is a technical vinyl in a luminous wheat beige tone, with a warm and light base. It does not read as gold, intense yellow or mustard, but as a soft colour with a cheerful presence and a brighter character than a neutral cream.
Its effect in interiors is warm, clear and optimistic. It brings visual light to furniture, walls and larger surfaces, but with more character than off-white or a very soft vanilla tone.
How Heleno Is Perceived In Interior Design
Heleno has a controlled yellow warmth. That is why it works especially well in Mediterranean and contemporary interiors where you want a clear, cheerful and easy-to-combine base without creating a palette that feels too childish or too sweet.
It is a colour that needs balance. If it is combined with woods that are too yellow, very muted earthy tones or dark colours as the dominant base, it can lose freshness. With fine-grain woods, light tones and Mediterranean accents, it gains a more contemporary and luminous look.
Recommended Decorative Combinations
Heleno pairs especially well with wood-effect vinyl with fine grain, medium woods with a Nordic or modern look, ash, washed oak and wood finishes with little yellow undertone.
It also works very well with solid colour vinyl wraps within the same range, such as light vanilla tones, soft yellows or luminous ochres, as long as there is enough difference between shades so the combination does not feel flat.
For a more Mediterranean and cheerful look, it can be combined with desaturated greens, light blues, burnt terracotta tones and soft terracottas. These accents add contrast without making the overall look too harsh and help Heleno feel fresher and more personal.
Real Applications In Kitchens, Bathrooms And Furniture
Kitchens
On kitchen furniture, Heleno adds warmth and a luminous presence without becoming a statement yellow. It works especially well on plain fronts, tall units, lower cabinets or areas combined with fine-grain wood and light worktops.
Bathrooms
On shower walls or bathroom furniture, Heleno creates a warm and bright atmosphere. It can be combined with light wainscoting, soft graphic floors, warm greys or small colour accents to create a more cheerful bathroom without losing balance.
Furniture, Wardrobes And Walls
Heleno can also be used on wardrobes, sideboards, auxiliary furniture or accent walls. It is a good choice when you want a light tone with more energy than a classic beige, but without using strong colours.
How It Changes Depending On The Finish
In matte finish, Heleno looks softer, more contemporary and balanced, with a character that works very well in Mediterranean, Japandi or modern interiors. In gloss, the colour feels more elevated: it gains depth, looks more lacquered and enhances its presence, making it a strong choice for more luxurious, eclectic spaces or interiors with a clearer decorative intention. In wood texture, the tone gains more depth and moves closer to a warm surface with a stronger material feel.
Frequently Asked Questions About Heleno Vinyl
Is Heleno beige, yellow or gold?
Heleno reads as a luminous wheat beige. It has a warm yellow base, but it is not gold, mustard or intense yellow.
Which woods does it combine best with?
It combines best with fine-grain woods, washed oak, ash and medium woods with a Nordic or modern look. It is better to avoid very yellow woods so the overall result does not feel excessively warm.
Which colours give it a more Mediterranean feel?
Desaturated greens, light blues, burnt terracotta tones and soft terracottas bring a more cheerful and personal Mediterranean feel without darkening the space.
Which combinations should be avoided?
It is better to avoid dark colours as the dominant base, very muted earthy tones and palettes made only of very similar yellows or creams, as they can reduce freshness and make the colour lose definition.
Which finish works best with Heleno?
It depends on the effect you want. In matte, Heleno feels calmer and works very well in Mediterranean, Japandi or modern interiors. In gloss, it looks more lacquered, enhances the colour and gives the space a more luxurious or eclectic feel. In wood texture, it adds depth without making the colour too intense.
- Negro
- Amarillo
Real opacity and two-layer construction made in our own workshop
Lokoloko vinyl incorporates a grey opacifying backing that guarantees total opacity over any background colour — black, wenge, coloured tiles, dark furniture. The design looks exactly as it appears on screen, regardless of the surface underneath. Over that base we print with eco-friendly inks and apply the protective finish laminate in our own workshop: two layers of material that give the vinyl body, flexibility and durability, allowing anyone to install it without prior experience, adapting to curves, edges and corners.
Aeronautical, nautical and automotive quality — 8 years outdoors, over 15 years indoors
Lokoloko vinyl is made with European raw materials that meet the standards of the most demanding industries: aeronautics, nautical and automotive. UV-protected inks will not yellow or lose colour. Up to 8 certified years outdoors — terraces, facades, vehicles, boats and garden furniture. Indoors, without direct exposure to the elements, over 15 years.
A material that does not degrade over time leaves no trace when removed: the PVC and adhesive remain bonded and come off cleanly in one piece, leaving no residue on the surface. The opposite of what happens with low-quality vinyls, where the PVC separates from the adhesive and leaves a layer that is practically impossible to remove.
Eco-friendly inks — the only ones approved for children's and healthcare spaces
Lokoloko vinyls are printed with 100% eco-friendly inks, nickel-free and odourless — the only ones in the decorative vinyl market approved for children's and healthcare spaces. No emissions, no odours, no compromises.
- UL ECOLOGO®
- UL GREENGUARD
- PEFC · FSC
- AgBB³

Waterproof and washable
Lokoloko vinyl withstands constant water, steam and temperatures from −50 °C to +100 °C, with no need for sealing or special care. Clean with a damp cloth, standard household cleaning products, KH7 and bleach. Suitable for the inside of showers, bathtubs, kitchen splashbacks and worktops without restrictions.
Suitable for any surface — indoors and outdoors
Lokoloko vinyl adheres to any smooth or textured surface, including textured walls. Unlike air-channel vinyls, its high-adhesion polyacrylate adhesive does not lose grip in areas of constant steam or humidity.
- Tiles, mosaic and floor tiles
- Melamine, lacquered and painted furniture
- Painted plasterboard, painted plaster and textured walls
- Wood, parquet, metal and glass
- Worktops and work surfaces
- Inside showers and bathtubs
- Outdoors: terraces, facades, vehicles, boats and garden furniture
Surface must be clean, dry and free of grease or dust before installation.
Professional repositionable adhesive
The high-adhesion polyacrylate adhesive on the back allows the vinyl to be repositioned during installation without rushing or making permanent mistakes. After the first few hours the adhesion becomes permanent: it will not come off with use, water or time.
Fire reaction classification B-s1,d0 according to EN 13501-1
Minimal contribution to fire, low smoke production and zero flaming droplets. Also certified under ASTM E 84-07 Class A (USA), UL969 and CSA C22.2 (Canada). Suitable for public spaces, hospitality and projects with regulatory requirements.
Made to order in our workshop in Almería, Spain
We design and print every vinyl when it is ordered, in our own workshop. We produce only what is needed — no surplus, no waste — so you pay for exactly what you use and every piece arrives freshly made.
No reflections — light is absorbed, colour deepens
The matte laminate eliminates any light reflection from the surface. Colour does not bounce — it is absorbed and deepens, giving the design a more real and natural presence. Especially suited to designs that replicate natural materials: stones, marbles, terrazos, cements and concretes gain a realism with the matte finish that gloss simply cannot match.
Conceals surface imperfections
By not reflecting light, the matte finish creates no shadows on the contact surface. Small imperfections, reliefs or irregularities in the tile, furniture or wall underneath are visually neutralised. It is the most recommended finish when the target surface is not in perfect condition.
Smooth and silky to the touch
The matte laminate gives the surface a soft, velvety texture that eliminates the plastic feel. On furniture and walls the result feels as natural as it looks.
Thickness and construction
160 microns (0.16 mm) total thickness: vinyl base with grey opacifying backing + eco-friendly ink printing + matte protective laminate applied in our own workshop. The laminate protects the print from rubbing, humidity and standard cleaning products.
Recommended for all rooms and surfaces
The matte finish is the most versatile in the range — it works in kitchens, bathrooms, furniture, walls, worktops and outdoors without restrictions. It is the first choice when you want to avoid the reflection of gloss and are looking for the most natural and long-lasting result.
On dark tones, as with any matte finish material, dirt is more visible than on light tones. Clean with a damp cloth and it wipes clean without marking.
What is the difference between matte and gloss?
Matte absorbs light and gives a natural, silky, reflection-free result — recommended for all surfaces and rooms. Gloss reflects light like a lacquered finish and gives a more luminous and intense result, recommended for vertical low-traffic surfaces such as doors, drawers and furniture fronts. On high-use horizontal surfaces — work tables, worktops, bars — gloss may develop micro-scratches over time, as with any high-end lacquered material.
Does the matte finish scratch?
No. The matte protective laminate withstands everyday rubbing and cleaning without scratching. You can clean with a cloth, household products, KH7 and bleach without damaging the finish. The only precaution: avoid abrasive scourers or products containing strong acids.
Lacquered finish — light reflects, colour intensifies
The gloss laminate reflects light like a high-end lacquered finish. Colour gains intensity and luminosity, with a visual depth that matte cannot match. Especially effective on deep, saturated or high-contrast tones — blacks, midnight blues, bottle greens, burgundies — where gloss multiplies the presence of colour.
Smooth and pleasant to the touch
The gloss laminate has a smooth and pleasant feel, similar to a quality lacquered piece of furniture. The surface is completely flat, with no texture.
Thickness and construction
160 microns (0.16 mm) total thickness: vinyl base with grey opacifying backing + eco-friendly ink printing + gloss protective laminate applied in our own workshop. The laminate protects the print from humidity and standard cleaning products.
Recommended surfaces
The gloss finish works best on vertical surfaces with low direct contact, where it can show its full potential without exposure to heavy-use wear.
- Doors and wardrobe fronts
- Drawers and furniture panels
- Walls and decorative panels
- Decorative coffee and side tables
- Kitchen appliances and vertical kitchen surfaces
Like any high-end lacquered material, gloss may develop micro-scratches over time on high-use horizontal surfaces — work tables, worktops or bars. For those applications we recommend the matte finish.
Cleaning the gloss finish
Clean with a soft damp cloth and standard household cleaning products. Avoid abrasive scourers, products with strong acids and dragging objects across the surface — the same care you would give any gloss lacquered furniture.
Does the gloss finish scratch?
Like any gloss lacquered surface — design furniture, appliances, car bodywork — the gloss laminate may develop micro-scratches with continuous rubbing or dragging objects. On vertical surfaces with low direct use (doors, panels, walls) it holds perfectly. For high-use horizontal areas we recommend the matte finish.
What is the difference between gloss and matte?
Gloss reflects light like a lacquer and intensifies colour — ideal for statement decorations and low-traffic surfaces. Matte absorbs light and gives a natural, silky result, recommended for all surfaces and rooms without exception. If in doubt, matte is the most versatile and long-lasting choice for any use.
Video Tutorials
We put here the last video so you know how easy it is to install the Lokolokos. But we have a page full of many examples
Some of the most outstanding examples are:
A wardrobe: its doors and sides with textured and smooth vinyl
Table lined with vinyl
Kitchen front, in front of the ceramic hob
Coffee table and office
How to remove the vinyl
And many more